See Below for Parts, Pricing, and Ordering

From $2.08 to $1126.00

Enter the quantity desired of each item in the Buy column.

Click Add to Cart to add them to your shopping cart
or Add to Wishlist to store them for ordering later.

  • Overview
    Aluminum alloy sheet is sold in the thicknesses and sheet sizes shown in the table. Order by part number. No guarantee against scratches is possible due to the handling required to cut sheets to sizes shown.

    CUTTING CHARGES: We can cut standard sheet sizes shown in the table to special sizes, but special order cutting charges will apply. Cutting Charges range from $20 to $50 or more depending on sizes desired and number of cuts. Special shapes are not cut, only straight edges. Request quote on Cutting Charges prior to order, as special cut pieces are not returnable.

    If mfg test reports are required there is a minimum $15.00 charge per order. Charge is higher if more than 5 items. P/N is “certs” - please indicate at time of order in the special instructions box.
  • Reviews

    Write a review

    by East C


    by Nick

    Had a JPI EDM 900 installed in my Mooney so I needed to do some panel work to cover up the holes left from the gauges that were removed. Purchased the 2024T3 ALUM SHEET .032 X 2X2 to do the cover up and am very pleased with the product, how it came shipped (very securely with wood around the edges so no bending would occur) and the speed at which it arrived. It comes with sheets of plastic on both sides, so you dont smug, scratch of otherwise damage the finish. (Helps save finish during the cutting phase of the process) Im planning on painting the sheets that I made black, to match my current panel, so Ill be peeling off the plastic coating on the front and etch painting them in black.

    by Sam W

    Good quality Great service

    by Bill M

    As advertised

    by Sean

    Great product. This grade of aluminum is very hard to come by in small quantities. You are a life saver.

    by Edward B

    The school has 4 x 8 sheets cut down for students to complete their sheet metal projects. Spruce can be counted on always get the sheets cut correctly and shipped out very quickly.

    by Joe C

    Was delivered nicely packed, great Jos on the way it was boxed. I also wanted the metal cut in strips of three inches, By four feet for the stc its going to be used on, nice job cutting the strips.

    by Tim F

    by Bob

    Was packaged to protect and it did.Thanks!

    by Greg W

    We ordered a couple of 4 x 8 x .032 sheets of 2024-T3. The material arrived rolled and well packaged. Our museum staff loves the speedy service of which this source provides!

    by Ed B

    Spruce does an excellent job cutting sheets down to proper size for student projects.

    by Chris W


    by Ed B

    Good material for student sheetmetal projects

    by Kevin L

    Corner damaged during shipment

    by John H

    Arrived without a scratch.

    by Manfred

    The sheet was great, delivered without bends or scratches!

    by Manfred

    The sheet was great thought it might be rolled but the 2 X 4 piece was shipped flat without scratches!
  • Q+A

    Ask a question

    What is the thickest sheet aluminum that can be rolled for shipping with UPS? 2024t3 and 6061t6
    The thickest we can roll for shipping is .032 on both 2024t3 and 6061t6.

    With 2024 t3 4x12 .025 sheets. Does the polished surface have a protective covering to keep the mill finish pristine? Thanks, Jared
    The aluminum sheets have a plastic sheet on both sides for protection.

    Which way does the grain run on a 2025T3 2' x 4' piece?
    The grain will run across the 2' section.

    Are both sides of the 2024T3 aluminum alcladed? If not, which side is? The printed or unprinted side?
    Yes, the alclad coating is on both sides.

    What certified specification does this 2024-T3 material meet?
    This 2024-T3 meets the following specs: AMS4462, AMS-QQ-A-250/5/RevB, ASTM B 209/Rev10, CMMP 019/RevD, CMMP 025/RevU

    With 2024 t3 .040 sheets, is there plastic on both sides for protection (as you noted is the case for 2024 t3 .025 sheets)?
    Yes, there is protective plastic on both sides of the sheet.

    What is the thickness tolerance of 2024-T3, 0.032 sheet ?
    +/- 0.003
Aircraft Parts
Pilot Supplies
Avionics Instruments
Building Materials
Engine Parts
Flight Training
Deal of the Day Shop by Aircraft Shop by Brand Order by Part #